FeaturesTechnical dataApplicationWorking Principle
1.Simple structure, low energy consumption, high reduction ratio, superior efficiency.
2.Be suitable for both dry type and wet type crushing.
3.The discharge size is easy to adjust to meet different customer requirement.
|
Model and size |
Feeding size |
Discharging size |
Capacity |
Motor Pole |
Powder (kw) |
Weight |
Overall Dimension |
|
PCΦ400×300 |
≤200 |
≤25 |
5-10 |
4 |
11 |
0.8 |
900×670×860 |
|
PCΦ600×400 |
≤250 |
≤30 |
10-22 |
4 |
22 |
2.26 |
1200×1050×1200 |
|
PCΦ800×600 |
≤250 |
≤35 |
18-40 |
4 |
55 |
4.8 |
1310×1180×1310 |
|
PCΦ1000×800 |
≤350 |
≤35 |
25-50 |
4 |
75 |
5.9 |
1600×1390×1575 |
|
PCΦ1000×1000 |
≤350 |
≤35 |
30-55 |
6 |
132 |
8 |
1800×1590×1775 |
|
PCΦ1250×1250 |
≤350 |
≤35 |
35-65 |
6 |
180 |
14 |
2060×1600×1890 |
|
PCΦ1400×1400 |
≤350 |
≤35 |
50-100 |
6 |
280 |
32 |
2365×1870×2220 |
|
PCΦ1600×1600 |
≤350 |
≤35 |
100-150 |
8 |
480 |
37.5 |
3050×2850×2800 |
Note:This specification is just reference,any changes are subject to the hammer crusher products.
The motor drives the rotors to rotate quickly in the crushing chamber. Materials enter the crusher through the feed port, and then they are being stricken, cut and ground into smaller particles by a hammer. There is a sieve plate under the rotor, so the materials whose size is smaller than the sieve size will be sieved out and others will be left to be further stricken and ground until they can be sieved out. The size of final product can be adjusted by changing the sieve plate. The gap between the rotor and the sieve plate can also be adjusted according to different requirement.
E-mail
Download
Print
Help
